Description
Medium Intensity Aircraft Warning Light engineered according to ICAO Medium Intensity Type A, B, C, B+A, C+A and FAA L-864, L-865 regulations.
OBSTAFLASH OFI is provided with 6 independent LED projectors 48V DC, powered by a stainless steel POWER CABINET. Wiring connector on the flash head included.
The device is designed with independent LED circuits that in case of failure of one of these allow 360° signalization and Cd requirements according to the norm. Remote alarm indication in the command box.
OBSTAFLASH OFI is available in the following LED versions: with white flashing light (50610-50613), dual color flashing light (50611-50614), white flashing light and red steady (50612-50615).
OBSTAFLASH OFI is the ideal solution for day and/or night marking of all kind of obstacle higher than 45 meters. For obstacles below 150 meters the use of white or dual color L-865/L-864 during daytime obviates the need to paint the obstacle with red and white stripes.
OBSTAFLASH OFI shall be used with an external photocell (see accessories section), connected to the POWER CABINET and oriented to the North (in the North Hemisphere).
Voltages
48V DC, 110/240V AC 50/60Hz +/-10% through POWER CABINET
For 48V DC versions, optional power supply through BATTERY CABINET (50549-50550), 12 hours backup or through stainless steel IP65 7Ah 1300W BATTERY CABINET (50551), for further information see accessories section.
Mechanical features
Aluminum and glass projector body
Aluminum vertical support
POWER CABINET: AISI 316L stainless steel
Optical features
Horizontal beam spread 360°
Vertical beam spread >3°
Fixing
Through aluminum vertical support with 6 Ø16mm mounting holes on the circumference Ø337mm.
Technical features
POWER CABINET
– Safety alarm closing contact
– Surge protection
– NC and NO alarm dry contact in case of failure of the light or of the power supply
– Test button with three positions: remote (photocell) / day / night
– Master/slave configuration in case of use of more POWER CABINET through shielded cable 3G1,5
– 8 luminous LED indicators for an easy diagnostic
– Possibility to connect intermediate Low Intensity Type B (NAVILITE 48V DC) lights for night operation only
– Integrated photocell switch
Accessories
Twilight/night photocell according to ICAO and FAA norms (see accessories section)
GPS SYNCHRO interface for synchronisation of separate installations according to ICAO and FAA norms (see accessories section)
REMOTE CONTROLLER OFH CTR CAN allows remote diagnostic of lights and their power supply or of the batteries (see accessories section)
SYSTEM DESIGN SUPPORT
Our Team of experts can assist designers and installers with professional support in terms of norms and system configuration.
