Description
High Intensity Aircraft Warning Light engineered according to ICAO High Intensity Type A (white) regulation.
OBSTAFLASH LED HI is a High Intensity white flashing light designed for day and night marking of obstacles higher than 150m.
The product is provided with 6 white flashing light LED projectors, separately and individually powered by a stainless steel POWER CABINET.
The product shall be used with an external photocell (see accessories section), connected to the POWER CABINET and oriented to the North (in the North Hemisphere).
Voltages
110/240V AC (50/60Hz) +/-10% (through stainless steel IP65 POWER CABINET at the bottom of the obstacle, cable entry from the bottom).
Mechanical features
Aluminum and glass projector body
Stainless steel vertical support
Optical features
Horizontal beam spread 120° (single light) – 360° with 3 warning lights distributed at 120° around the obstacle
Vertical beam spread >3°
Fixing
Through stainless steel vertical support with 4 fixing points
Technical features
POWER CABINET
– Safety alarm closing contact
– Surge protection
– NC and NO alarm dry contact in case of failure of the light or of the power supply
-Test button with three positions: remote (photocell) / day / night
– 8 luminous LED indicators for an easy diagnostic
– Integrated photocell switch
– Master/slave configuration for multiple lights synchronisation through copper cable or external controller with optical cable
Accessories
PHOTOCELL : Photocell for day/twilight and twilight/night light output change, to be used with the High Intensity Aircraft Warning Lights Type A (see accessories section)
GPS SYNCHRO interface for synchronisation of separate installations according to ICAO and FAA norms (see accessories section)
REMOTE CONTROLLER OFH CTR CAN allows remote diagnostic of lights and their power supply or of the batteries (see accessories section)
SYSTEM DESIGN SUPPORT
Our Team of experts can assist designers and installers with professional support in terms of norms and system configuration.
